- Boxed plate construction; MIG welded.
- 4130 chromoly UniBall cups; comes preassembled
- Assists w/ proper alignment and improved handling.
- Compatible with 2005 – current Tacoma 2WD / 4WD.
- Proudly designed and manufactured in the USA.
- Zinc plated components are rust and corrosion resistant.
When you lift a truck, you are changing the geometry of many front-end components. There’s a lot of factors to consider when doing this, as not only can it affect your ride quality if not done properly, but it can be a detrimental to your safety. Let’s face it, every time you get behind the wheel you could potentially be putting yourself and everyone else around you at risk. That’s why it’s important to not skip out on the proper upgrades. One of the most recommended upgrades when lifting a vehicle is the Upper Control Arms. Dirt King Fabrication has designed their Bushing Upper Control Arms with increased castor and repositioned pivot angles. The increased castor allows for proper alignment and improved handling, while the pivot angles reduce stress on the joints and increases your safety. To further this product with maximum strength and increased articulation, Dirt King has replaced the weak factory ball joints with 1” stainless steel uniballs. For the inner pivots Dirt King uses durable Delrin bushings with grease fittings. This provides consumers with a very simple way of servicing when needed. To mount the arms to the spindle, Dirt King includes high-grade 17-4 stainless steel misalignment spacers and military grade F911 hardware. To provide consumers with a product that can last a lifetime, Dirt King designed all components on the Upper Control Arms to be rebuildable if needed. Your Bushing Upper Control Arms come preassembled and include detailed instructions to ensure a hassle-free installation.
2005-Current Toyota Tacoma 2WD / 4WD
2005-2015 Toyota Hilux Vigo 2WD / 4WD
*Not compatible with 5 lug Tacoma’s
*Wheel Travel / Lift*
The upper control arms must be paired with OEM replacement coil overs to lift the vehicle. They offer an additional 1” of down travel compared to the stock upper control arms. These arms are compatible with King, Fox, Bilstein, ADS and Icon coil overs. Do not install these upper control arms with coil spacers that over articulate the suspension.
*Some King OEM replacement coil overs have short reservoir hoses that come in contact with aftermarket upper control arms. This can be solved by installing longer reservoir hoses or adjusting the reservoir to allow for more slack in the hose.
The upper control arms will allow for 33” tires but the front section of the cab mount may need to be cut to avoid tire rubbing while turning. In addition, the front bumper may require trimming for proper tire clearance.
- Amount of lift: 0-3" of lift
- Track width: Stock
- Maximum tire size: 33"
- Maximum rim backspacing: 4.75"
- Minimum rim size: 16"
- Coil over shock size: Stock or OEM replacement
The installation of Dirt King Fabrication’s Bushing Upper Control Arms is fairly simple and can be completed at home if you have the required tools. Each product comes packaged with easy to read instructions and illustrations to ensure a hassle-free installation.