Vehicles
  • Shop By Vehicle:

  • Categories
  • Roof Racks

  • Bed Racks

  • Front Bumpers

  • Rear Bumpers

  • Rock Sliders

  • Skid Plates

  • Brands
  • Blog
  • Top Blogs:

  • CBI Front Bumper on a Toyota Tacoma

    Tacoma Front Bumpers Guide

  • Sherpa Roof Racks

  • Prinsu Roof Racks

  • C4 Fabrication Tacoma Bumpers

  • Sherpa Antero Roof Rack | Toyota 4Runner (1996-2002)

    • Industry leading design; 1/4 inch industry leading thick aircraft grade aluminum side panels and standard stainless required hardware.
    • Half length aluminum roof rack designed to work exclusively with the 3rd Gen 4Runner (1996-2002).
    • Drill-free installation; zero modification required - rack bolts into factory locations within minutes.
    • Fully modular design; total of 5 fully-adjustable extruded aluminum crossbars. Ample tie down points.
    • Full modular design; total of 5 fully-adjustable extruded aluminum crossbars.
    • 600 static pound load rating while only weighing in at 35 pounds.
    • Designed and constructed in the U.S.A.

    Sherpa Equipment Co. hasn't just developed another Toyota 4Runner Roof Rack. They have developed a stronger, tougher, and lighter weight roof rack than many of the options out there today. The Antero Roof Rack for the 1992 to 2002 Toyota 4Runner is no exception.

    Sherpa Antero Roof Rack

    The Antero Rack is a 3rd Gen 4Runner Sherpa Roof Rack that is considered one of the industry's leading racks and one of the only half length roof racks for the 3rd Gen 4Runner. Like all Sherpa Equipment Co. Roof Racks, the Antero rack is constructed out of industry leading materials including thick aircraft grade aluminum side panels, extruded aluminum cross bars, and all racks come with stainless steel hardware. Roof aluminum components keep weight down while maintaining strength. Powder coated orders will ship with black oxide stainless hardware. Raw aluminum orders will ship with standard stainless hardware.

    The Antero Rack is a 3rd Gen 4Runner Sherpa Roof Rack that is considered one of the industry's leading racks and one of the only half length roof racks for the 3rd Gen 4Runner. Like all Sherpa Equipment Co. Roof Racks, the Antero rack is constructed out of industry leading materials including thick aircraft grade aluminum side panels, extruded aluminum cross bars, and all racks come with stainless steel hardware. Roof aluminum components keep weight down while maintaining strength. Powder coated orders will ship with black oxide stainless hardware. Raw aluminum orders will ship with standard stainless hardware.

    The Antero roof rack can be customized upon order. You have the ability to order the rack with a black textured powder coat finish or a bare aluminum finish. You can also order the side plates or crossbars with a different finish. The options are endless with this U.S.A. made rack. Let us not forget to mention that the rack is drill free and requires zero modification to your 3rd Gen 4Runner.

    FAQs

    How much weight can the Sherpa Antero Roof Rack hold? The Sherpa Antero Roof Rack has a static weight capacity of 500 lbs. and a dynamic weight capacity of 200 lbs.

    What accessories work with the Sherpa Antero Roof Rack? All Sherpa accessories work flawlessly with the Antero rack. Rooftop tents, awnings and much more will also work with the rack, but please be aware that this is a half length rack so not all full-size accessories will likely fit.

    How much height does the Sherpa Antero Roof Rack add to my 4Runner? The Sherpa Antero Roof Rack features a low-profile design. It only adds about 2 inches to your vehicle when installed.

    How many crossbars come with the Sherpa Antero Roof Rack? A total of 5 crossbars are included with the Antero Roof Rack.

    Specifications

    • Material: Aluminum.
    • Side Plate Material: 1/4 inch thick aircraft-grade aluminum.
    • Wind Deflector Material: Wind deflector and edge trim not included due to this rack being a half-length rack.
    • Cross Bar Material: 2x1 inch threaded t-channel aluminum.
    • Hardware: Stainless steel hardware.
    • Finish: Black powder coat finish or raw aluminum finish.
    • Fitment: 1996-2002 Toyota 4Runner.
    • Dimensions (installed): 63.5 inches (front to back); 43.5 inches (side to side); 2 inches (height).
    • Weight: ~35 pounds.
    • Static Weight Capacity: 500 pounds.
    • Dynamic Weight Capacity: 200 pounds.
    • Light Bar: N/A - half length rack allows a single row light bar to be mounted to the front crossbar if desired.
    • Installation: Factory mounting points.

    Installation

    Installation of the Antero Roof Rack by Sherpa Equipment Co. can be completed right at home in just a couple hours in most cases. The rack was designed to be completely bolt on and does not require any drilling or special tools. All orders will come with easy to read instructions along with vehicle specific mounting hardware including mounting brackets (track anchor plates are not included) for an easy installation. If you happen to have any questions, don't hesitate to reach out to one of our product experts.

    Please note, if your 4Runner tracks are missing anchor plates, you can order those separately.

    Contact form

    Contact Us Today!

    Please reach out to our team using this form. We are happy to assist with any questions you might have.