Sherpa DiamondBack PAK System Bed Rack | Toyota Tacoma (2005-2023)

Sherpa PAK System bed racks are rated for 400 lbs dynamic (while driving) and 1000 lbs static (parked).

A typical installation for a non-drill rack system takes roughly 1-2 hours with two people.

Sherpa's non-drill rack systems are designed to be used without additional sealants. Silicone is generally only required for drill-style racks.

Yes. This bed rack is engineered to mount directly to a DiamondBack HD Bed Cover on a 3rd or 4th gen Toyota Tacoma. It will not fit without the DiamondBack cover in place.

Yes — the rack is engineered to fit both 2nd gen (2005-2015) and 3rd gen (2016-2023) Toyota Tacoma models when paired with the correct DiamondBack HD Bed Cover for your generation.

The DiamondBack version is a half-height rack that mounts onto the bed cover instead of the truck bed rails. It keeps a lower profile, which is ideal if you want an RTT that clears cab height without going full high-mount.

Sherpa racks are designed to allow full functionality of factory sunroofs and moonroofs. Visibility from inside the vehicle will vary depending on your rack configuration and mounting points, but the roof itself will still open and close normally.

Sherpa recommends against automatic car washes with any rack installed. The brushes and high-pressure spray can loosen hardware, damage powder coat, or catch on crossbars. Hand-wash instead.

Every Sherpa rack is finished in black textured powder coat over aluminum. It is UV-stable and formulated for years of outdoor exposure. Aluminum crossbars are black anodized for extra corrosion resistance.

Yes. Sherpa crossbars use 1/4"-20 hardware with drop-in T-nuts, so you can mount most third-party rack accessories — kayak racks, bike racks, cargo boxes, awnings — using standard hardware.

Every Sherpa product carries a Lifetime Warranty to the original retail purchaser against defects in workmanship or materials. Contact Truck Brigade or Sherpa directly to file a warranty claim.

Every Sherpa product is designed, precision-cut, powder-coated, and assembled in the USA — most of it within 500 miles of Sherpa's Berthoud, Colorado shop.