- Industry leading design; 1/4" thick aircraft grade aluminum side panels & stainless-steel hardware.
- Designed to work exclusively with the 2010+ Toyota 4Runner.
- Drill-free installation; rack bolts into factory locations within minutes
- Fully modular design; total of 9 fully-adjustable extruded aluminum crossbars.
- Choose to receive your Crestone Roof Rack as bare material or with a powder-coat finish.
- Featured load rating of 700 static pounds while only weighing in at 51 pounds.
- Designed and constructed in the U.S.A.
Sherpa Equipment Co. hasn’t just developed another Toyota 4Runner Roof Rack. They have developed a stronger, tougher, and lighter weight roof rack than many of the options out there today. The Crestone Roof Rack for the 2010-2020 Toyota 4Runner is no exception.
Sherpa’s industry leading 1/4” aircraft grade aluminum side panels make this roof rack one of the most desirable options for your 2010-2020 4Runner. It’s due to this innovative design that Sherpa Equipment Company’s 4Runner roof rack has been proven to always exceed expectations. It’s 1/4” aircraft grade aluminum side panels aren’t the only thing that sets this rack above the competition, it also features stainless-steel hardware, 9 extruded aluminum cross bars, and a drill-free installation. This rack also doesn’t require silicon upon installation which can’t be said by most.
The Crestone Roof Rack from Sherpa Equipment Company for the 2010-2020 Toyota 4Runner can support up to 700 lbs. of static weight and weighs in at only 51 lbs. This makes it an awesome choice for storing and transporting a variety of gear including roof top tents, fuel and water containers, recovery gear, and much more.
Sherpa Equipment Co. created The Crestone Rack with the ability to select a full-height fairing, half-height fairing, or no fairing at all. In addition, you also have the ability to select optional powder-coat of the rack, crossbars, or both.
When purchasing The Crestone Roof Rack by Sherpa Equipment Co., you can select to receive your rack as bare material or with a black powder-coat finish. Please note that if you choose to receive it with a powder-coat finish, the lead time can potentially increase by a week or so.
Installation of the American Made Crestone Roof Rack is extremely simple due to the fact that there is no drilling or modifications required. You read that right, there’s no need to pull out the power tools for this install. The rack was designed to be totally modular meaning that you have flexibility in terms of crossbar placement. If you have any questions about the Crestone Roof Rack don’t hesitate to reach out to one of our product experts.
This product may have a lead time. Please review the current lead times for further information. CURRENT LEAD TIMES
- Drilling Required: No
- Material: Aluminum components; stainless hardware.
- Finish: Bare aluminum or black powder coat.
- Rack Dimensions: 95” x 47.5” x 2”
- Crossbar Dimensions: 1” x 2” x 47”
- Load Rating: 300 lbs. Dynamic | 700 lbs. Static
Installation of The Crestone Roof Rack by Sherpa Equipment Co. can be completed right at home. The rack was designed to be completely bolt on and does not require any drilling or special tools. All orders will come with easy to read instructions along with vehicle specific mounting hardware. If you happen to have any questions, don’t hesitate to reach out to one of our product experts.
SHERPA EQUIPMENT COMPANY will warranty all products produced and distributed by SHERPA EQUIPMENT COMPANY for the LIFETIME of the product. Products will only be warrantied if installed in accordance with SHERPA EQUIPMENT COMPANY installation guidelines. Any modification to the original product design, functionality, or use, by said customer voids all warranty eligibility. It is the sole discretion of SHERPA EQUIPMENT COMPANY to determine warranty eligibility. Our Limited Lifetime Warranty is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original retail purchaser sells or otherwise transfers the product to any other person.
SHERPA EQUIPMENT COMPANY reserves the right to remedy defects in workmanship or materials in one of two ways.
Sherpa Equipment Company will issue replacements components to the customer that deems defective or inconsistent with the quality of it’s brand.
Sherpa Equipment Company will elect to issue the customer a full or partial refund for the defects or damages of the product.
This warranty does not cover defects caused by normal wear and tear, rust, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder coated products. SHERPA EQUIPMENT COMPANY is not responsible for defects that are not in control of Sherpa Equipment Company such as, trail damage, overloading, incorrect assembly or poor maintenance practices.
REPLACEMENT OF A DEFECTIVE PRODUCT OR THE ISSUANCE OF A REFUND (AS DETERMINED BY SHERPA EQUIPMENT COMPANY) IS A PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY. ANY AND ALL DAMAGE TO A PURCHASER’S VEHICLE, CARGO AND/OR TO ANY OTHER PERSON OR PROPERTY IS EXCLUDED.