Leitner Designs HydroPOD

Leitner Designs is very well known for their Active Cargo System Bed Racks which caters to many accessories. Those accessories include the Leitner Designs GearPOD, Leitner Universal Mounting Plates and much more. Leitner Designs has added to that list of well known accessories to compliment their ACS Bed Rack System with the all new Leitner Designs HydroPOD. Engineered with convenience in mind, the Leitner HydroPOD can be filled and pressurized by hose (hose adapter included) or by hand (due to the built in hand pump). This ensures that you are able to pressurize your system regardless of where you are!

The Leitner Designs HydroPOD (also referred to as the Leitner Shower Kit) holds 4.8 gallons of water and was designed to work in perfect conjunction with the Active Cargo System (Both ACS Classic and ACS FORGED), giving you a secure way to rinse off after a day at the beach, riding a dirtbike, or a hike. By installing the Leitner HydroPOD on your Leitner Bed Rack, you no longer have to take up valuable bed space or find a shower solution that would need to be stored separately. The hose that comes with the HydroPOD is 20 foot long which will allow you to reach the engine compartment even if the HydroPOD is installed at the very rear of your ACS Bed Rack. In addition, the included hose coils as there is less tension on it! This allows the hose to take up less space when not in use! The adjustable spray nozzle has several different spraying features that are perfect whether you are looking to rinse of quickly or clean off some gear while on the trail.

Included with your Leitner Designs HydroPOD Shower Kit is the pod itself, 20 foot hose, spray nozzle, hose adapter (to fill), and all hardware needed to complete the installation. Fill your HydroPOD and hit the trail, assured that you're ready to take on whatever the adventure ahead may have in store.

Specifications

• Material: Polyethylene
• Finish: Black

Installation

The Leitner HydroPOD can be installed or removed from your ACS Bed Rack within seconds! Leitner designed the HydroPOD with the consumer in mind, giving you the ability to install or remove by simply using T-bolts and nuts. Included with your kit will be two brackets and the hardware.