Your Cart is Empty
- Lighting Accessories
- Medical and First Aid
- Mounts and Brackets
- Performance
- Rear Bumpers
- Recovery Devices and Accessories
- Rock Sliders
- Roof Racks
- Roof Rack Accessories
- Roof Top Tents
- Skid Plates
- Snorkels
- Suspension
- Storage and Organization
- Tail Lights
- Tailgate Inserts
- Tire Carriers
- Tonneau Covers
- Top Racks
- Winches
Blog
BOSS StrongBox Top Loader (14W x 37D x 10H)
$678.00
- Universal-fit top-loading vehicle safe with a 14"W x 37"D x 10"H footprint — long and narrow to run along the edge of a trunk, cargo area, or truck bed.
- 2.9 cubic feet of secured storage — fits long guns, pistols, mags, laptops, weapon accessories, and gear.
- Constructed from 16-gauge cold-rolled steel with a double-layered 14-gauge steel lid.
- Medeco high-security lock with shielded 10-gauge locking cam to prevent tampering and pry attacks.
- Gas strut assists lid opening; reinforced heavy-duty steel hinge for daily use.
- Foam-lined interior in a wrinkled-black powder-coat finish. Made in America with a Lifetime Guarantee.
SKU: 7126-7530
Why Choose the 7126-7530 Top Loader?
The BOSS StrongBox 7126-7530 Top Loader is one of Boss's most popular universal-fit boxes because the 14 x 37 footprint runs cleanly along the side of a sedan trunk, an SUV cargo floor, or a truck bed while leaving the rest of the space open for other gear. Built to the same law-enforcement specification Boss supplies to federal fleets, the double-layered lid, shielded Medeco lock cam, and 16-gauge steel body give you serious hardened storage without the bulk of a full safe. If you're carrying long guns, sensitive tools, or valuables on a regular basis, this is the workhorse.
Key Features
Medeco high-security lock
One Medeco high-security lock with a 10-gauge shielded cam. The cam is fully guarded to prevent pry, tamper, and cutting attacks.
Double-layered steel lid
Outer 14-gauge cold-rolled steel over a 16-gauge steel body with (2) 16-gauge lock guards shielding the locking cam from the inside.
2.9 cubic feet of storage
Long, narrow footprint fits full-size long guns, range gear, laptops, and weapon accessories.
Gas strut lid assist
40-lb. gas strut opens the lid smoothly and holds it open hands-free.
Heavy-duty reinforced hinge
16-gauge steel hinge with a 0.120" pin, 1.50" open width, and 0.50" knuckles — built for daily open-and-close cycles.
Powder-coated finish
Powdered epoxy coating in wrinkled black — durable finish that hides scuffs and resists corrosion.
Specifications
| Outside Dimensions | 14"W x 37"D x 10"H |
| Inside Dimensions | 12.75"W x 36"D x 8.75"H |
| Storage Capacity | 2.9 cubic feet |
| Weight | 45 lbs. |
| Body Construction | 16-gauge cold-rolled steel |
| Outer Lid | 14-gauge cold-rolled steel |
| Inner Lid | (2) 16-gauge cold-rolled steel lock guards shielding (2) 10-gauge high-security locking cams |
| Lock | (1) Medeco high-security lock |
| Locking Cam | (1) 10-gauge high-security cam through inner-lid slot into enclosure slots |
| Enclosure Locking Slots | (2) obround slots for the lock cam |
| Gas Strut | (1) 40-lb. force |
| Hinge | 16-gauge CRS, 1.50" open width, 0.120" pin, #6 screw, 2.00" leaf holes, 0.50" knuckles |
| Finish | Powdered epoxy — wrinkled black |
| Interior | Foam-lined |
| Mounting | Bottom mounting holes with mounting hardware included |
| Country of Origin | Made in America |
| Warranty | Lifetime Guarantee |
What's Included
- (1) BOSS StrongBox 7126-7530 Top Loader
- (1) Medeco high-security lock with (2) keys
- (1) 40-lb. gas strut (installed)
- Bottom mounting hardware
- Foam liner (pre-installed)
Installation
The 7126-7530 uses factory-drilled bottom mounting holes and includes mounting hardware for a permanent install to your vehicle floor, truck bed, or cargo platform. For a semi-permanent option, the optional Heavy Duty Cable and Clamp (sold separately) anchors the box to a vehicle tie-down without drilling. Position the box against the side wall of a trunk or cargo area for the cleanest footprint, and confirm the 14 x 37 dimensions clear your specific vehicle before drilling.
About BOSS StrongBox
BOSS StrongBox has been designing and manufacturing vehicle security boxes for Law Enforcement and Federal Government agencies for more than a decade. Every StrongBox is built in America from cold-rolled steel with Medeco high-security or equivalent locks, shielded locking cams, and pry-resistant latching systems — the same construction Boss ships to duty fleets is what you get in every consumer product.
Boss backs every box with a Lifetime Guarantee against manufacturing defects. If you have a fitment question or need help selecting the right box for your vehicle, our team is here to help.
Frequently Asked Questions
Will this fit in my vehicle?
The 7126-7530 has a 14"W x 37"D footprint. It fits the trunks of most full-size sedans, the cargo floor of mid- and full-size SUVs (Ford Interceptor Utility, Explorer, Edge, Escape, Chevy Tahoe/Silverado/Suburban, GMC Yukon/Sierra 1500/Terrain, Dodge Durango/RAM 1500, Toyota 4Runner/Tacoma/Tundra, Jeep Wrangler/JK/Cherokee), and truck beds with enough width. Always measure your specific vehicle before ordering.
Can it be locked open for quick access?
The 40-lb. gas strut holds the lid open hands-free while you access contents, but the lock itself secures the lid in the closed position — it is not a keep-open latching mechanism.
What is the Medeco lock rated for?
Medeco locks are UL-437 high-security rated and are widely used in commercial and government applications. The 7126-7530 pairs the Medeco cylinder with a 10-gauge shielded locking cam for pry resistance from both the outside and the inside.
Can I mount it without drilling into my vehicle?
Yes. The optional Heavy Duty Cable and Clamp accessory (sold separately) allows you to anchor the box to an existing vehicle tie-down or fixed point without drilling. For maximum security, permanent bolt-down through the bottom mounting holes is recommended.
Contact form
Contact Us Today!
Please reach out to our team using this form. We are happy to assist with any questions you might have.