Vehicles
  • Shop By Vehicle:

  • Categories
  • Roof Racks

  • Bed Racks

  • Front Bumpers

  • Rear Bumpers

  • Rock Sliders

  • Skid Plates

  • Brands
  • Blog
  • Top Blogs:

  • CBI Front Bumper on a Toyota Tacoma

    Top Tacoma Accessories

  • Sherpa Roof Racks

  • Prinsu Roof Racks

  • C4 Fabrication Tacoma Bumpers

  • Sale

    Prinsu Roof Rack - Full Length Non-Drill | Toyota 4Runner (2010-2024)

    • The Original Prinsu Roof Rack: The Prinsu 4Runner roof rack has been around for many years and is an industry staple in the Overland & Offroad community .
    • Modular Design for Maximum Versatility: Completely customizable so that you can configure your rack to fit your lifestyle and adventures.
    • Premium Construction: Laser cut rails that are made of 3/16" 5052 aluminum plate; Crossbars are 2"x1" aluminum extrusion.
    • Simple Installation: The Prinsu roof rack 4runner features a no-drill installation and will mount to factory locations.
    • Improved Hardware: Black zinc hardware included with every purchase.
    • Available with Multiple Wind Deflectors: Choose between a standard wind deflector, a 40" light bar cutout, or the Baja Designs LP4 cutout.

    Toyota 4Runner Prinsu Roof Rack Full Non-Drill | The Original Prinsu Rack

    The 5th Gen 4Runner Prinsu roof rack is made of premium materials and has been designed for the 2010-2024 4Runner. This rack features a fully modular lightweight aluminum construction and is designed to install directly into your factory mounting holes. The use of the factory mounting holes allows you to easily install this Rack without the need to drill. This Toyota 4Runner roof rack has a dynamic load limit of 300-400 pounds with a static load capacity of 600-800 pounds, making it the perfect addition for any adventure enthusiast that is looking to maximize the carrying capacity of their vehicle.

    Unlimited Mounting Capabilities

    In terms of functionality, the Non-drill Prinsu roof rack for Toyota 4Runner is in a league of its own and perfect for off-road or overland adventures. This roof rack is considered "the original'' and has been thoroughly tested on some of the toughest trails around the world. The Full-length Prinsu roof rack for 4Runner is completely modular, allowing you to customize the rack to your needs. This rack will work with all Prinsu roof rack accessories and a variety of other products such as roof top tents, kayak carrier, and much more.

    Completely Customizable

    Prinsu Racks come with either a standard wind deflector or a wind deflector that can accept a Light Bar - in this case a 40 inch Light Bar. A Prinsu Edge Trim is also included, designed to attach to the bottom of your deflector to prevent wind noise between the roof and the rack. Optional Prinsu Shield Plates can be added for a customized unique look while also adding overall strength to the roof rack. All Prinsu Racks come standard with a black powder coat finish, but there is the option to order your 5th Gen 4Runner rack with a different color powder coat.

    Kit Includes

    The Toyota 4Runner roof rack comes with (2) side rails that are constructed out of 3/16 inch 5052 aluminum and a front wind deflector that is constructed out of 1/8 inch 5052 aluminum. Additionally, this roof rack will come with (9) 2x1 inch threaded aluminum t-channel cross bars (with built in drop points) that offer numerous solutions for roof rack accessories and most rooftop tents. All installation hardware and instructions are included with your purchase. 

    FAQs

    What is a Prinsu Roof Rack for a 4Runner? The 5th Gen 4Runner roof rack is a fully modular roof rack designed to increase the functionality of your 4Runner. It works perfect for mounting accessories and gear including a Roof Top Tent.

    How much weight can a 4Runner Prinsu Rack hold? The Prinsu 4Runner Rack can support 600-800 pounds (static load capacity) and 300-400 pounds (dynamic load limit). Prinsu Racks have been field tested with Roof Top Tents and numerous accessories.

    How much height does the Prinsu Rack add to my vehicle?The Prinsu roof rack features a low-profile design and only adds about 1.75 inches to the overall height of your 4Runner.

    Prinsu Roof Rack 4Runner dimensions

    Does a Prinsu 4Runner Rack affect mileage? This depends on your driving style, what you have mounted on the roof rack, among numerous other factors. If you just have the rack mounted on your vehicle you can expect the MPG to not change much at all. With accessories mounted such as a Roof Top Tent you will notice some small changes to your overall MPG.

    How many crossbars come on the Prinsu 4Runner Full-Length Rack? The Prinsu 4Runner Rack will come with 9 total powder coated black 2x1 crossbars, 1 black 1x1 inch crossbar, and 1 unfinished crossbar. The one cross bar (unfinished) is designed to be installed out of sight behind the wind deflector.

    How much wind noise does the 4Runner Prinsu Rack generate? Prinsu Racks are designed to be extremely aerodynamic and prevent wind noise. Thanks to their ultra low-profile design and angled wind deflector with edge trim, the roof rack should not generate much noise at all. If it is generating noise there may be an issue with the installation.

    Can I put a Roof Top Tent on my 4Runner Roof Rack? Absolutely! Prinsu roof racks are perfect for mounting Roof Top Tents. The t-channel crossbars provide an easy way to secure your tent and we also offer Prinsu Tent Mounts to make the process even easier.

    Will the Prinsu Rack 4Runner work with my sunroof?Absolutely. The Prinsu Full Roof Rack features a modular design and adjustable cross bars. Cross bars can be configured to allow an opening above the roof rack. However, it is advised to evenly distribute the cross bars. The sunroof will still function, but you will have some cross bars going across your roof above the sunroof.

    What accessories can I mount on my Prinsu 4Runner Rack? The optional are endless. Some of the popular items are awnings, tool mounts, light bars, and more. Roof rack mounted products including the functional Prinsu MAXTRAX Mount offer a seamless way to access items such as MAXTRAX.

    Specifications

    • Category: 5th Gen 4Runner Roof Rack.
    • Fitment: 2010-2024 Toyota Tacoma Double Cab.
    • Rack Material: 1/4" 5052 aluminum plate.
    • Side Plate Material: 3/16 inch high-grade aluminum.
    • Wind Deflector Material: 1/8 inch high-grade aluminum.
    • Cross bar Material:2x1 inch t-channel aluminum with drop in points.
    • Finish:Black powder coat finish.
    • Dimensions (box): 95 x 9 x 8 (inches)
    • Dimensions (installed): 92 inches (front to back); 48 inches (side to side); 1.75 inches (height).
    • Weight: 50 pounds.
    • Static Weight Capacity:600-800 pounds.
    • Dynamic Weight Capacity: 300-400 pounds.
    • Light Bar:Optional 40 inch light bar (Baja Designs, Rigid Industries, Cali Raised etc.).
    • Installation: Factory mounting points.

    Installation

    Installation of this rack is quite simple and can be completed at home with basic hand tools. This Prinsu rack is designed to be installed into factory mounting holes and is completely bolt on. It should be noted that the very front of the 4Runner does not contain factory mounting holes. This section of the rack will use 3M tape strips to secure the front of the roof rack.

    Included with your purchase will be Toyota 4Runner Prinsu roof rack full non-drill installation instructions so that you have step by step guidance. 

    Contact form

    Contact Us Today!

    Please reach out to our team using this form. We are happy to assist with any questions you might have.