Vehicles
  • Shop By Vehicle:

  • Categories
  • Roof Racks

  • Bed Racks

  • Front Bumpers

  • Rear Bumpers

  • Rock Sliders

  • Skid Plates

  • Brands
  • Blog
  • Top Blogs:

  • CBI Front Bumper on a Toyota Tacoma

    Top Tacoma Accessories

  • Sherpa Roof Racks

  • Prinsu Roof Racks

  • C4 Fabrication Tacoma Bumpers

  • Prinsu Roof Rack -3/4 Length | Toyota 4Runner (2010-2023)

    • 3/4 length Roof Rack designed for the 5th Gen 4Runner (2010+). Roof Rack sits on the back 3/4 of your Toyota 4runner.
    • Completely modular design featuring a non drill completely bolt on installation using factory mounting holes.
    • Full aluminum construction for enhanced weight savings while maintaining the ability to support impressive load sizes.
    • Comes standard with a black powder coat finish.
    • Prinsu Racks are designed, engineered and constructed in the U.S.A.

    The Prinsu 3/4 Length Rack 4Runner is a very high quality, low profile, and completely modular option offering numerous solutions for mounting cargo boxes, a rooftop tent, accessories, and more. It is designed to be a 3/4 Roof Rack as opposed to a full length Roof Rack. This means the Prinsu Roof Rack will not cover the full length of your 4Runner. Rather this Prinsu 4Runner Rack will only cover 3/4 of your 5th Gen 4runner Roof measuring from back to front.

    Prinsu 3 4 Rack 4Runner

    Each Prinsu Rack consists of two 1/4 inch laser cut aluminum side rails, 2x1 inch extruded aluminum cross bars with facing t slot channel (one cross bar will come unfinished and is designed to be installed behind the wind deflector), 1/8 inch aluminum wind deflector, noise reducing edge trim, and all the necessary mounting hardware. The provided noise reducing trim is designed to fit on the bottom of your wind deflector to help prevent wind noise.

    Prinsu Roof Racks can be customized to best fit your needs and the adventure ahead. Prinsu offers a few different styles of the wind fairing including their standard wind deflector or one with a cutout for a 40 inch Light Bar or Baja Designs LP4 Lights. In addition to the standard black power coat, the Toyota 4runner Prinsu Roof Rack can be ordered with a white, gray, or bare finish. Adding a set of optional shield plates can add an additional level of strength and customization.

    The Prinsu Roof Rack is an excellent option right out of the box for cargo security and is a great Rack for with numerous solutions for safely mounting gear including rooftop tents. A more impressive and useful option that the Prinsu 5th Gen 4runner 3/4 Roof Rack features is its ability to work with Prinsu mounting accessories such as their Awning Mounts, Recovery Boards, RotoPaX Mounts, tool mounts, and more. This allows you to set up the Prinsu 5th Gen 4Runner Roof Rack to best fit your needs.

    FAQs

    How much weight can the Prinsu 4Runner Roof Rack support? The Prinsu 5th Gen 4Runner 3/4 Length Roof Rack has an impressive weight capacity and can support 600-800 pounds (static) and 300-400 pounds (dynamic).

    Does the Prinsu 4Runner Roof Rack require drilling into the vehicle? No, the 3/4 Length Prinsu Rack features an easy install. There is no drilling required - the Rack installs directly into factory mounting holes.

    Can the Prinsu 4Runner Roof Rack be installed by one person, or does it require multiple people? It can be installed by one person, but we strongly recommend you have someone help you especially when it comes to lifting the assembled Rack onto the vehicle.

    What accessories are available for the Prinsu 4Runner Roof Rack? There are many accessories available for Prinsu Rack Systems including all Prinsu Roof Rack Accessories that are designed to work with this Roof Rack.

    Is the Prinsu 4Runner Roof Rack compatible with a sunroof on the vehicle? Yes, especially the 3/4 length Roof Rack. It will not cover the sunroof at all allowing full compatibility.

    How long does it take to install the Prinsu 4Runner Roof Rack? In most cases it should take 3-4 hours to complete the installation.

    Specifications

    • Material: Aluminum.
    • Side Plate Material: 1/4 inch high-grade aluminum.
    • Wind Deflector Material: 1/8 inch high-grade aluminum.
    • Cross bar Material: 2x1 inch t-channel aluminum with drop in points.
    • Finish: Powder coated satin black.
    • Fitment: 2003-2009 Toyota 4Runner.
    • Weight: 55 pounds.
    • Static Weight Capacity: 600-800 pounds.
    • Dynamic Weight Capacity: 300-400 pounds.
    • Light Bar: Optional 40 inch light bar or LP4 Cutout (Baja Designs, Rigid Industries, Cali Raised etc.).
    • Installation: Factory mounting points.

    Installation

    The 2010+ 3/4 Length Toyota 4Runner Prinsu Rack features an easy installation that can typically be completed at home within a few hours using basic hand tools. It is a non-drill Rack and attaches directly to factory mounting points with the provided assembly hardware. Once the Rack is properly installed, you are ready to hit the road.

    Contact form

    Contact Us Today!

    Please reach out to our team using this form. We are happy to assist with any questions you might have.