15,500 pound rated line pull to get you out of the toughest situations.
Stainless steel hardware with aluminum crossbars.
Inductive braking system reduces heat.
3-stage planetary gear system.
6.6 hp series wound motor.
IP68 rated waterproof.
Full lifetime warranty.
The Smittybilt Gen2 XRC 15.5lb Winch has been designed to be one of the ultimate recovery systems. Due to the advanced 6.6 HP amphibious motor and revised gear ratios of the 3-stage planetary gear system, this product was created to provide top-notch pulling power and lighting fast line speed. Built for long-lasting performance, the Smittybilt Gen2 XRC Winch boasts an IP67 rating which means it can withstand being fully submerged for up to 30 minutes, a super-cool inductive braking system for long lasting performance and a durable UV-resistant matte black finish. For user convenience, Smittybilt reinvented the 500-amp solenoid and you can now mount it in one of three locations to find the perfect set-up for your vehicle’s needs.
Your Smittybilt Gen2 XRC Winch is backed by a Lifetime Mechanical Warranty and 3-year electrical warranty.
Waterproofing: IP67 Rating
Fairlead: 4-Way Roller
Rated Line Pull: 15,500Lbs (7,045kgs) single-line
Remote Control: Included
Motor: 6.6hp Series Wound
Recommended Battery: 650CCA Minimum for Winching
Control: Remote Switch, 12" (3.7m) lead
Battery Leads: 25mm, 72"(1.83m)
Gear Train: 3-Stage Planetary
Gear Ratio: 397:1
Finish: Textured Black
Weight: 124.0Lbs (56.5Kgs)
Clutch: Sliding Ring Gear Mounting
Bolt Pattern: 10.0" x 4.50"
Brake: Automatic In-Drum
Overall Dimensions (L x W x H): 23.5" x 8.4" x10.7
Drum Size: Diameter 3.45" (88.0mm)
Length: 10.0" (254mm)
Cable: 93.5" 25/64" Diameter
Our crew at Truck Brigade rates the level of difficulty for the Gen2 XRC Winch as a Level 2 (intermediate). This installation was designed to be done at home and will typically take 1-2 hours to accomplish based on the individual’s experience. It is designed as a bolt-on application however drilling may be required depending on the vehicle.
Smittybilt, Inc. offers a limited lifetime warranty (to the original retail purchaser) for each new Smittybilt consumer/RV electric winch against manufacturing defects in workmanship and materials on all the mechanical components. Electrical components consisting of motors, solenoids, wiring, wire connectors and associated parts have a limited one (1) year warranty. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Warranty registration cards for each winch must be submitted at the time of purchase or within 30 days by the end user. Warranty will only be valid for the original purchaser of the winch and Installed on the vehicle for which it was originally registered. Smittybilt electric winches are intended for recreational self-recovery usage. The warranty is void if the winch is used in commercial/industrial applications. The obligation under this warranty, statutory or otherwise, is limited to the replacement or repair at the manufacturer`s factory, or at a point designated by the manufacturers, of such part(s) as shall appear to the manufacturer, upon inspection of such part(s) as shall appear to the manufacturer, upon inspection of such part(s), to have been defective in material of workmanship. This warranty does not obligate Smittybilt,Inc. to bear the cost of labor or transportation charges in connection with the replacement or repair of defective parts, nor shall it apply to a product upon which repairs or alterations have been made, unless authorized by the manufacturer, or for equipment misused, neglected or improperly installed.
Join The Brigade!
Join The Brigade for first access to sales and promotions, new product offerings, and other exclusive offers.