15,500 pound rated line pull to get you out of the toughest situations.
Stainless steel hardware to prevent rust and corrosion.
3-stage planetary gear system.
6.6 hp series wound motor.
IP68 rated waterproof.
Full lifetime warranty.
The all-new Smittybilt GEN2 X2O 15.5K Winch has been enhanced in almost every way to provide off-road enthusiasts with increased performance and trouble-free operation. To provide users with maximum pulling power, line speed and the highest torque available in the industry, Smittybilt has designed the GEN2 X2O with an all-new 6.6HP amphibious motor and has connected it to a 3-stage Planetary Gear System. The X2O line-up features a completely waterproof 500 AMP solenoid pack that can be mounted in 2 different locations, depending on your application needs.
Each winch comes with an all new integrated remote control that can be wired directly to the winch or unplugged for wireless operation, ensuring ease of use and maximum versatility. To further increase line speeds and durability, the GEN2 X2) Winch utilizes optimized gear ratios. When purchased from Truck Brigade, your GEN2 X2) Winch will be covered by Smittybilt’s Lifetime Mechanical Warranty and 5-Year Electrical Warranty. If you’re looking for a name you can trust when venturing off the beaten path, Smittybilt is the way to go.
Waterproofing: IP68 Rating
Rated Line Pull: 15,500Lbs (7,045kgs) Single Line
Motor: 6.6hp Series Wound
Control: Remote Switch, 12" (3.7m) lead
Gear Train: 3-Stage Planetary
Gear Ratio: 430:1
Clutch: Sliding Ring Gear
Brake: Automatic Out-Of-Drum
Drum Size: Diameter 3.45"
Cable: 98.5" 3/8" Diameter
Fairlead: 4-Way Roller
Remote Control: Included
Recommended Battery: 650CCA Minimum for Winching
Battery Leads: 25mm2, 72"(1.83m)1
Finish: Textured Black
Weight: 150.0Lbs (45.0Kgs)
Mounting Bolt Pattern: 10.0" x 4.50"
Overall Dimensions: (L x W x H) 22.3" x 7.5" x 10.7"
Our crew at Truck Brigade rates the level of difficulty for the X2O Winch as a Level 2 (intermediate). This installation is something that can be done at home and will typically take 1-2 hours to accomplish based on the individual’s experience. It is designed as a bolt-on application however drilling may be required depending on the vehicle or mounting location.
Smittybilt, Inc. offers a limited lifetime warranty (to the original retail purchaser) for each new Smittybilt consumer/RV electric winch against manufacturing defects in workmanship and materials on all the mechanical components. Electrical components consisting of motors, solenoids, wiring, wire connectors and associated parts have a limited one (1) year warranty. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Warranty registration cards for each winch must be submitted at the time of purchase or within 30 days by the end user. Warranty will only be valid for the original purchaser of the winch and Installed on the vehicle for which it was originally registered. Smittybilt electric winches are intended for recreational self-recovery usage. The warranty is void if the winch is used in commercial/industrial applications. The obligation under this warranty, statutory or otherwise, is limited to the replacement or repair at the manufacturer`s factory, or at a point designated by the manufacturers, of such part(s) as shall appear to the manufacturer, upon inspection of such part(s) as shall appear to the manufacturer, upon inspection of such part(s), to have been defective in material of workmanship. This warranty does not obligate Smittybilt,Inc. to bear the cost of labor or transportation charges in connection with the replacement or repair of defective parts, nor shall it apply to a product upon which repairs or alterations have been made, unless authorized by the manufacturer, or for equipment misused, neglected or improperly installed.