12,000 pound rated line pull to get you out of the toughest situations.
Synthetic line prevents kinking or binding.
Stainless steel hardware to prevent rust and corrosion.
3-stage planetary gear system.
6.6 hp series wound motor.
IP68 rated waterproof.
Full lifetime warranty.
Smittybilt Gen2 X2O 12K Comp Series Winches feature a state-of-the-art specially-coated synthetic rope cable that will never kink, curl, or splinter and even better, it's also resistant to UV rays and abrasions. Each X2O Comp Series Winch comes with rope sleeve for the synthetic cable, an attached forged steel hook, high-grade competition billet aluminum fairlead, a larger clutch for easy control during gloved operations, oversized tie rod struts for maximum strength and an inductive braking system that is designed to reduce heat for longer lasting performance. As with the regular X2O Winch, the X2O Comp Series is designed to give you the convenience of a wireless remote control.
To ensure that your winch stands up to anything Mother Nature throws your way, it has been topped off with a UV-resistant matte black textured finish. If you’re looking for a premier winch that is sure to provide the best performance, look no further than the Smittybilt GEN2 X2O 12K Comp Winch.
Waterproofing: IP68 Rating
Rated Line Pull: 12,000Lbs (5,454kgs) Single Line
Motor: 6.6hp Series Wound
Control: Remote Switch, 12" (3.7m) lead
Gear Train: 3-Stage Planetary
Gear Ratio: 265:1
Clutch: Sliding Ring Gear
Brake: Automatic Out-Of-Drum
Drum Size: Diameter 2.5"
Cable: 98.5" 3/8" Diameter
Cable Type: Synthetic Rope
Remote Control: Included
Recommended Battery: 650CCA Minimum for Winching
Battery Leads: 25mm2, 72"(1.83m)1
Finish: Textured Black
Weight: 67.0Lbs (30.4Kgs)
Mounting Bolt Pattern: 10.0" x 4.50"
Overall Dimensions: (L x W x H) 22.3" x 5.4" x 9.4"
Our crew at Truck Brigade rates the level of difficulty for the X2O Comp Winch as a Level 2 (intermediate). This installation is something that can be done at home and will typically take 1-2 hours to accomplish based on the individual’s experience. It is designed as a bolt-on application however drilling may be required depending on the vehicle.
Smittybilt, Inc. offers a limited lifetime warranty (to the original retail purchaser) for each new Smittybilt consumer/RV electric winch against manufacturing defects in workmanship and materials on all the mechanical components. Electrical components consisting of motors, solenoids, wiring, wire connectors and associated parts have a limited one (1) year warranty. New cable assemblies are warranted against defects in workmanship and materials when received by the retail purchaser. There is no applicable warranty after initial use. Warranty registration cards for each winch must be submitted at the time of purchase or within 30 days by the end user. Warranty will only be valid for the original purchaser of the winch and Installed on the vehicle for which it was originally registered. Smittybilt electric winches are intended for recreational self-recovery usage. The warranty is void if the winch is used in commercial/industrial applications. The obligation under this warranty, statutory or otherwise, is limited to the replacement or repair at the manufacturer`s factory, or at a point designated by the manufacturers, of such part(s) as shall appear to the manufacturer, upon inspection of such part(s) as shall appear to the manufacturer, upon inspection of such part(s), to have been defective in material of workmanship. This warranty does not obligate Smittybilt,Inc. to bear the cost of labor or transportation charges in connection with the replacement or repair of defective parts, nor shall it apply to a product upon which repairs or alterations have been made, unless authorized by the manufacturer, or for equipment misused, neglected or improperly installed.