- Industry leading 1/4" thick aircraft grade aluminum side panels; stainless steel hardware.
- Designed to work exclusively with the 2005+ Double Cab Toyota Tacoma.
- Drill-free installation; rack bolts right into factory locations.
- Full modular design; total of 7 fully-adjustable extruded aluminum crossbars.
- Numerous options available including wind fairing, powder coat, etc.
- Featured load rating of 700 static pounds while only weighing 45 pounds.
- Designed and constructed in the U.S.A.
Sherpa Equipment Co. hasn’t just developed another Toyota Tacoma Roof Rack. They have developed a stronger, tougher, and lighter roof rack than many of the options out there today. The Grand Teton Rack for the 2005+ Toyota Tacoma Double Cab is no exception.
Sherpa’s industry leading 1/4” aircraft grade aluminum side panels make this rack one of the most desirable racks for your 2005+ Toyota Tacoma Double Cab. If that is not enough consider the stainless-steel hardware, 7 extruded aluminum cross bars, and drill free installation. This rack also doesn’t require silicon upon installation which can’t be said by most.
The Grand Teton Roof Rack from Sherpa Equipment Company for the 2005+ Double Cab Tacoma can support up to 700 lbs. of static weight while weighing in at only 45 lbs. This makes it an awesome choice for storing and transporting a variety of gear including roof top tents, fuel and water containers, recovery gear, and much more.
Sherpa Equipment Co. created the Grand Teton Rack with the ability to select a full-height fairing, half-height fairing, or no fairing at all. In addition, you also have the ability to select optional powder-coat of the rack, crossbars, or both.
Installation of the American made Grand Teton Roof Rack is extremely simple due to the fact that there is no drilling required. In fact, the rack bolts right into factory holes located on the top of your 2005+ Toyota Tacoma. The rack was designed to be totally modular meaning that you have flexibility in terms of crossbar placement. If you have any questions about the Grand Teton Roof Rack don’t hesitate to reach out to one of our product experts.
Please note: This rack will only work with the Double Cab Tacoma. It will not work with an Access Cab Tacoma.
This product may have a lead time. Please review the current lead times for further information. CURRENT LEAD TIMES
- Material: Aluminum components; stainless hardware.
- Finish: Bare aluminum or black powder coat.
- Dimensions: 63” x 48.5” x 2”
- Weight: 45 pounds
Installation of the Grand Teton Roof Rack by Sherpa Equipment Co. can be completed in the comfort of your home. The rack was designed to be completely bolt on and does not require any drilling or special tools. All orders will come with easy to read instructions. If you happen to have any questions, don’t hesitate to reach out to one of our product experts.
SHERPA EQUIPMENT COMPANY will warranty all products produced and distributed by SHERPA EQUIPMENT COMPANY for the LIFETIME of the product. Products will only be warrantied if installed in accordance with SHERPA EQUIPMENT COMPANY installation guidelines. Any modification to the original product design, functionality, or use, by said customer voids all warranty eligibility. It is the sole discretion of SHERPA EQUIPMENT COMPANY to determine warranty eligibility. Our Limited Lifetime Warranty is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original retail purchaser sells or otherwise transfers the product to any other person.
SHERPA EQUIPMENT COMPANY reserves the right to remedy defects in workmanship or materials in one of two ways.
Sherpa Equipment Company will issue replacements components to the customer that deems defective or inconsistent with the quality of it’s brand.
Sherpa Equipment Company will elect to issue the customer a full or partial refund for the defects or damages of the product.
This warranty does not cover defects caused by normal wear and tear, rust, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder coated products. SHERPA EQUIPMENT COMPANY is not responsible for defects that are not in control of Sherpa Equipment Company such as, trail damage, overloading, incorrect assembly or poor maintenance practices.
REPLACEMENT OF A DEFECTIVE PRODUCT OR THE ISSUANCE OF A REFUND (AS DETERMINED BY SHERPA EQUIPMENT COMPANY) IS A PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY. ANY AND ALL DAMAGE TO A PURCHASER’S VEHICLE, CARGO AND/OR TO ANY OTHER PERSON OR PROPERTY IS EXCLUDED.