- Industry leading design; 1/4" thick aircraft grade aluminum side panels & stainless-steel hardware.
- Designed to work exclusively with the 2010+ Ford F150.
- Drill-free installation; rack bolts into factory locations within minutes.
- Fully modular design; each extruded aluminum cross bar features T-slots to allow for easy mounting of accessories.
- Choose to receive your Topper Rack as bare material or with a black powder-coat finish.
- Featured load rating of 600 static pounds while only weighing in at roughly 40 pounds.
- Designed and constructed in the U.S.A.
There’s no question about it, the Overland industry has experienced explosive growth over the last few years. It seems that almost daily we are seeing new products hit the market. As exciting as it may be to explore new products, the Truck Brigade Team is firm believers in utilizing products from companies that have proven themselves time and time again. With that being said, Sherpa Equipment Co. is a brand that we fully stand behind. Sherpa Equipment Co. offers a variety of products that have been built solely for the purpose of being used off-road. This specific product page is dedicated to their Ford F150 Topper, also referred to as The Crows Nest.
Sherpa’s industry leading 1/4” aircraft grade aluminum side panels make this Ford F150 Topper Rack one of the most desirable options for your 2010+ F150. It’s due to this innovative design that Sherpa Equipment Company’s Ford F150 Topper Rack has been proven to always exceed expectations. It’s 1/4” aircraft grade aluminum side panels aren’t the only thing that sets this rack above the competition, it also features stainless-steel hardware, extruded aluminum cross bars, and a drill-free installation. This rack also doesn’t require silicon upon installation which can’t be said by most.
The Crows Nest Topper Rack from Sherpa Equipment Company for the 2010+ Ford F150 can support up to 600 lbs. of static weight and weighs in at roughly 40 lbs. This makes it a prime choice for storing and transporting a variety of gear including roof top tents, fuel and water containers, recovery gear, and much more.
The crew at Sherpa Equipment Co. understand that each truck owner uses his or her rig for their personalized lifestyle. Due to this, they have made sure to offer the Crows Nest Topper Rack in a few different variations to best fit your needs. For starters, you will notice that you have the ability to select from the drop downs your choice of fitment your specific bed application. In addition, you can also select the track contour (flat or contoured) and to receive your rack and crossbars as bare material or with a black powder-coat finish. Please note that if you choose to receive your rack and crossbars with a powder-coat finish, the lead time can potentially increase by roughly a week or so.
Installation of the American Made Crows Nest Topper Rack is extremely simple due to the fact that there is no drilling or modifications required. The engineers at Sherpa designed this roof rack to mount directly into the installed roof tracks on your topper with 1/4” thick adjustable aluminum brackets. This unique approach allows you to easily adjust your topper rack as needed, ensuring that you get the perfect setup for your cargo and gear. If you’re in the market for a Topper Rack that was built specifically for your 2010+ F150, look no further than what Sherpa Equipment Co. has to offer!
- Material: Aluminum components; stainless hardware.
- Finish: Bare aluminum or black powder coat.
- Weight: 40 lbs.
- Product Length (Short Bed): 76”L x 51”W
- Product Length (Long Bed): 94”L x 51”W
- Crossbar Dimensions: 51” x 2” x 1”
- Number of Crossbars: 7 (Short Bed) | 9 (Long Bed)
- Load Rating: 300 lbs. Dynamic | 600 lbs. Static
Installation of the Sherpa Equipment Company Topper Rack for the 2010+ Ford F150 can be completed right at home. The rack was designed to be completely bolt on and does not require any drilling or special tools. In fact, the roof rack mounts directly into the installed roof tracks on your topper with 1/4” thick adjustable aluminum brackets. All orders will come with easy to read instructions along with vehicle specific mounting hardware. If you happen to have any questions, don’t hesitate to reach out to one of our product experts.
SHERPA EQUIPMENT COMPANY will warranty all products produced and distributed by SHERPA EQUIPMENT COMPANY for the LIFETIME of the product. Products will only be warrantied if installed in accordance with SHERPA EQUIPMENT COMPANY installation guidelines. Any modification to the original product design, functionality, or use, by said customer voids all warranty eligibility. It is the sole discretion of SHERPA EQUIPMENT COMPANY to determine warranty eligibility. Our Limited Lifetime Warranty is effective for as long as the original retail purchaser owns the product. This warranty terminates when the original retail purchaser sells or otherwise transfers the product to any other person.
SHERPA EQUIPMENT COMPANY reserves the right to remedy defects in workmanship or materials in one of two ways.
Sherpa Equipment Company will issue replacements components to the customer that deems defective or inconsistent with the quality of it’s brand.
Sherpa Equipment Company will elect to issue the customer a full or partial refund for the defects or damages of the product.
This warranty does not cover defects caused by normal wear and tear, rust, scratches, accidents, or products used for racing/competition. This warranty does not cover damage to the finish of powder coated products. SHERPA EQUIPMENT COMPANY is not responsible for defects that are not in control of Sherpa Equipment Company such as, trail damage, overloading, incorrect assembly or poor maintenance practices.
REPLACEMENT OF A DEFECTIVE PRODUCT OR THE ISSUANCE OF A REFUND (AS DETERMINED BY SHERPA EQUIPMENT COMPANY) IS A PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY. ANY AND ALL DAMAGE TO A PURCHASER’S VEHICLE, CARGO AND/OR TO ANY OTHER PERSON OR PROPERTY IS EXCLUDED.